General Discussion - Corrections to newsletters Help

Print Page | Close Window

Corrections to newsletters Help

Printed From: The Carbine Collector's Club
Category: The Club
Forum Name: General Discussion
Forum Description: Carbine Related
URL: http://www.uscarbinecal30.com/forum/forum_posts.asp?TID=3076
Printed Date: Apr 19 2024 at 8:17pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: Corrections to newsletters Help

Posted By: Lupus Dei
Subject: Corrections to newsletters Help
Date Posted: Sep 01 2017 at 4:13pm

If you are reading through the newsletters and see a listed correction or addendum please note it below.

Many times there are updates to COMs or previous articles.

I would like to have this made into an index so everyone can make notes.

Please add the page number when possible

242-4 has corrections to 240 millionth overton stock, remover SP. COM is a repeat. Correction to 241 COM, change data sheet

299-4 has a correction to 291-2

CCNL 369-11 correction to CCNL 368 COM

-------------
Louis Dey
Admin
www.uscarbinecal30.com/forums

Replies:

Posted By: New2brass
Date Posted: Sep 07 2017 at 4:08am

CCNL 351-12 has 2 corrections to CCNL 337

330-10 to 328-5

-------------
http://www.uscarbinecal30.com/forum/club-assistance-saginaw-receivers_topic4716.html" rel="nofollow - Club Survey Saginaw Receivers

Posted By: New2brass
Date Posted: Feb 19 2019 at 11:16am

The COM feature in NL 368, page 16, paragraph 4 under Stock Group contained an error. It stated

“Wallace Barnes was the sole supplier of front band locking springs to Winchester. Most/all Winchester

carbines have the flat/chisel type locking spring. Therefore it seems likely that Wallace Barnes

produced the flat/chisel type spring and supplied them to Inland.”

The subcontractor should be Seymour Smith & Sons Inc., not Wallace Barnes.

-------------
http://www.uscarbinecal30.com/forum/club-assistance-saginaw-receivers_topic4716.html" rel="nofollow - Club Survey Saginaw Receivers

Posted By: New2brass
Date Posted: Mar 03 2019 at 5:59pm

CCNL 171-1 correction to CCNL 162-1

IBM serial number 3625135 is mentioned. This is not an IBM serial number. Two digits were transposed. Please correct your newsletter to read 3652135

CCNL 330-10 correction to CCNL 328-5 Buttplate does not have the missing dot

-------------
http://www.uscarbinecal30.com/forum/club-assistance-saginaw-receivers_topic4716.html" rel="nofollow - Club Survey Saginaw Receivers

Posted By: New2brass
Date Posted: Mar 18 2020 at 5:12pm

CCNL 359-14 Serial number correction to club card

CCNL 366-16 correction to COM 365

CCNL 369-11 to COM 368-16

CCNL 322-7 two corrections to 320-3 SI marked bolt. barrel date

328 to 327-11

Anyone reading of flipping through the newsletters is encouraged to to post any corrections so we can publish a list.

This can save hours when doing research especially when erroneous information comes up.

-------------
http://www.uscarbinecal30.com/forum/club-assistance-saginaw-receivers_topic4716.html" rel="nofollow - Club Survey Saginaw Receivers

Posted By: New2brass
Date Posted: Oct 03 2020 at 2:25pm

CCNL 345-13 states WB page 501. correct to page 301

-------------
http://www.uscarbinecal30.com/forum/club-assistance-saginaw-receivers_topic4716.html" rel="nofollow - Club Survey Saginaw Receivers

Posted By: New2brass
Date Posted: Jan 04 2022 at 1:07pm

CCNL 147-4 incorrectly shows a commercial muzzle device as a T-12 See CCNL 155-3 as it being erroneous

CCNL 205-5 clarifies 204-1 that the T-12 pictured is a commercial device

-------------
http://www.uscarbinecal30.com/forum/club-assistance-saginaw-receivers_topic4716.html" rel="nofollow - Club Survey Saginaw Receivers

Posted By: Rebel92
Date Posted: Jul 25 2022 at 3:37pm

NL 39, last page, shows type F TH reported on Winchester SN 1,040,000. In NL 65, it states to go back to NL 39, and mark that information out as it was incorrect.